To make the partitions listed below on your system; this is the partition we'll need for our server installation example; the command will be under Disk Druid:
/boot our /boot directory.
|
5
|
Linux Native
|
|
/usr our /usr directory.
|
512
|
Linux Native
|
/home our /home directory.
|
1146
|
Linux Native
|
/chroot our /chroot directory.
|
256
|
Linux Native
|
/cache our /cache directory.
|
256
|
Linux Native
|
/var our /var directory.
|
256
|
Linux Native
|
our /Swap partition leave the Mount Point Blank.
|
128
|
Linux Swap
|
/tmp our /tmp directory.
|
256
|
Linux Native
|
/ our / directory.
|
256
|
Linux Native
|
After the partitions of your hard disk has been completed, you must see something like the following information on your screen. Our mount points will look like this:
Table 3.1. Sample representaion of partitions
| Mount Point | Device | Requested | Actual | Type |
|---|---|---|---|---|
| /boot | sda1 | 5M | 5M | Linux Native |
| /usr | sda5 | 512M | 1146M | Linux Native |
| /home | sda6 | 256M | 256M | Linux Native |
| /chroot | sda7 | 256M | 256M | Linux Native |
| /cache | sda8 | 256M | 256M | Linux Native |
| /var | sda9 | 256M | 256M | Linux Native |
| <Swap> | sda10 | 128M | 128M | Linux Swap |
| /tmp | sda11 | 256M | 256M | Linux Native |
| / | sda12 | 256M | 256M | Linux Native |
| Drive | Geom [C/H/S] | Total (M) | Free (M) | Used (M) | Used (%) |
|---|---|---|---|---|---|
| sda | [3079/64/32] | 3079M | 1M | 3078M | 99% |
We are using a SCSI hard disk hence the first two letters of the
device are sd.